|
RØDE Broadcaster End-Address Broadcast Condenser Microphone
OVERVIEW
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
SPECIFICATION
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00"
Polar Pattern Cardioid
Address Type End
Frequency Range 20Hz ~ 20,000Hz
Output Impedance 40Ω
Maximum SPL 128dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 2.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB
@ 1kHz
Equivalent Noise Level (A-weighted) 14dB-A
Power Options +24V phantom power+48V phantom power
Output 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-)
and Pin (ground)
Net Weight 577g
Dimensions Length - 167mm Diameter - 50mm
Shipping Weight 840g
Warranty 1 year with free extension to 10 years following
registration http://www.rodemic.com/warranty
STANDARD ACCESSORIES
1 x Broadcaster End-Address Broadcast Condenser Microphone
1 x 5 pin ‘on air’ indicator adaptor
1 x RM2 (Stand Mount)
1 x ZP1 (Zip Pouch) | 
